Daniel Defense Delta 5 Pro barrel swap

The store will not work correctly in the case when cookies are disabled.

Details

Our cold hammer forged barrels are known to be as accurate and long lasting as any you’ll find. And now, you can easily switch the caliber of your DELTA 5 with this barrel conversion kit.  We’ve taken the modularity found in our ARs and adopted it for the bolt-action rifle by attaching the barrel via a barrel extension.  Since the extensions are installed by us at our factory, headspace will always be correct because it is set at the time of manufacturing.  To change barrels, all you need to do is remove the barreled action, remove the barrel nut, install the new barrel, tighten the barrel nut to the proper torque and then re-install the entire barrel/action assembly into the stock.  With the included ½” barrel nut wrench, you can swap barrels in minutes. No gunsmith required!

FEATURES

• Factory-Set Headspace
• Easy to Install within Minutes
• No Gunsmith Required

Specifications

More Information

Guaranteed Satisfaction

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer's products.

• Support
• Contact

DESIGNED FOR THE ENTHUSIAST

PROOF Research pre-fit carbon fiber barrels are available for the Daniel Defense Delta 5 and DD5 AR-10. Our Daniel Defense pre-fit barrels will arrive threaded, chambered, and ready for installation.

By designing carbon fiber barrels specifically for the Daniel Defense Delta 5 and DD5, we’ve made it easy for individuals to swap barrels on their rifle.

Lightweight

Up to 64% lighter than traditional steel barrels of similar contour.

Extreme Temperature Resistance

Improved heat dissipation for cooler and longer lasting barrels.

Unprecedented Durability

Wrapped with high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin.

• 6 CM
• 6.5 CM
• 308 Win

132937 Delta 5 24 7.5 5/8-24 $1,099

Diagram

Part Number 132937

Rifle Model Delta 5

Barrel Length in Inches 24

Twist Rate 7.5

Muzzle Thread 5/8-24

MSRP $1,099

Diagram

132883 DD5 20 8 Rifle +1 .750 5/8-24 $1,149

Diagram

Part Number 132883

Rifle Model DD5

Barrel Length in Inches 20

Twist Rate 8

Gas Length Rifle +1

Journal .750

Muzzle Thread 5/8-24

MSRP $1,149

Diagram

132920 Delta 5 24 8 NA NA 5/8-24 $1,099

Diagram

Part Number 132920

Rifle Model Delta 5

Barrel Length in Inches 24

Twist Rate 8

Gas Length NA

Journal NA

Muzzle Thread 5/8-24

MSRP $1,099

Diagram

132890 DD5 18 10 Rifle .750 5/8-24 $1,149

Diagram

Part Number 132890

Rifle Model DD5

Barrel Length in Inches 18

Twist Rate 10

Gas Length Rifle

Journal .750

Muzzle Thread 5/8-24

MSRP $1,149

Diagram

132913 Delta 5 20 10 NA NA 5/8-24 $1,099

Diagram

Part Number 132913

Rifle Model Delta 5

Barrel Length in Inches 20

Twist Rate 10

Gas Length NA

Journal NA

Muzzle Thread 5/8-24

MSRP $1,099

Diagram

WARNING: PROOF Research does not recommend the use of Copper Creek Cartridge Co. 22 Creedmoor loaded ammunition.
This ammunition is known to be loaded to higher than standard pressures and dangerous conditions may result from its use.