Bushnell Wingman flashing red and green while charging

ATTENTION WINGMAN USERS

We have ended support of the Bushnell Golf Legacy App. Download the new Bushnell Golf App for your Apple or Android device using the links below.

WINGMAN HELP

Mounting Wingman on your cart bar with BITE? Easy.
Setting up Wingman on your device? You might have some questions. That’s why we created a video series to walk you through the basics of Wingman. Still have questions? We’ve also compiled a list of frequently asked Wingman questions.

WINGMAN HOW TO VIDEOS

From setting up your Wingman, to playing a round of golf, our how to videos will show you everything you need to get Wingman on the course.

Registering Your Wingman With iPhone

Registering Your Wingman With Android

Wingman Settings with iPhone

Wingman Settings With Android

Wingman Device Page Overview

Charging Speaker & Other Devices

Basic Speaker Operation

“Play Golf” Options

Battery Indicator On Speaker/Phone

Replacing Remote Battery

Playing Golf With Your Wingman

WINGMAN QUESTIONS

Frequently asked questions about the Wingman.

GENERAL Q&A:

• The Wingman Speaker and Remote both need to be connected in order to register the device to your account/create a new account. Because of this, there are 4 factors that could be causing the issue.
  • The Remote – Does the remote beep when the button is pressed and held. If no, you may have a defective remote or a bad remote battery. Please note, the remote will only beep when put into pairing mode. If already paired the remote will not beep.
  • The Phone (i.e., settings) – please ensure Bluetooth and location services are allowed access to the Bushnell Golf App.
  • The App – please see separate walkthrough instructions for app connectivity for iPhone and Android.
  • The speaker – the speaker can be reset by the reset button inside the “IN” charge port.

1. In the Wingman Device Page on the app there is a pair/unpair button. If the remote has become unpaired with the phone, the user will need to press that button to repair their Wingman.
2. If connectivity issues persist, the detailed walkthrough instructions should be used.

1. The user will need to set the phone to do not disturb
   1. Please note, there are multiple settings in Do Not Disturb, and the user needs to make sure these are selected appropriately to allow/not allow the calls the user wants to ring.

1. Please take a screenshot of the error with the Serial Number and send it to .

1. Use password reset
2. If you do not know your email address associated with your account, you need to contact .

1. Replacements for lost remotes can be purchased through Customer Service by calling 1-800-423-3537.

1. Please make sure the Bushnell Golf app has access to your location on your phone.
2. Please make sure auto hole advance is turned on in the play golf settings in the app.

1. Ensure Location Services are turned on and allowing the Bushnell Golf app access
2. Ensure that “Sleep Mode” is turned on in your play golf settings. This allows the app to continue to function when you phone is in Sleep Mode.

1. If your Wingman is powered on, the LED indicator will not turn green, but will remain orange throughout charging.
2. If you are charging your Wingman with the Power OFF, the LED will be RED while it is charging and turn GREEN when the charging is complete.

1. For iPhone – the battery life will show up on the top of your iPhone when the device is turned on and paired (next to your phone battery icon). This icon is small, so if you want to see the exact percentage of Battery, you need to add a Widget to your “Today View”.
   1. Scroll to the bottom of the Today View and tap Edit.
   2. Under More Widgets, tap the plus sign in green next to the Batteries widget.

• Optionally, you can put the Batteries widget in the exact spot at the top where you want it in the list. Tap, hold, and drag it to the location you want and then release.

1. Tap Done.

1. For Android – Go to Settings, Connections, Bluetooth. In the device list Wingman will show up and the battery life will be displayed if it powered on and paired to you phone.

1. The remote has a CR-2032 battery that is removable and can be replaced.

1. 2 x 10 watts

1. The Wingman is IPX6 water resistant, meaning it can take on a limited amount of water and cannot be submerged.

SETUP INSTRUCTIONS FOR ANDROID

Advanced Instructions - Initial Pairing For Android:

1. Restart the phone (initial pairing only).
2. Start with both the speaker and remote turned OFF.
3. Go to the Bluetooth settings on your phone. If OFF, turn ON.
4. Look at the previously paired Bluetooth devices. If the Wingman speaker and/or remote are listed, select the option to forget them from the phone (this will vary depending on the manufacturer and build version of Android).
5. Open the Bushnell app on your phone.
6. Select Add New Device.
7. Tap on the Wingman icon from the list of devices to be added.
8. Select continue.
9. Press and hold the button on the remote until it chirps.
10. Hit next on the Bushnell app*.
11. The app screen will proceed to asking you to power on the Bluetooth speaker. Exit the app and pair the Bluetooth speaker to the phone via Bluetooth settings
12. The app will then ask you to continue. Select this and the device finalize pairing. The Wingman is now ready to use for golf/music.

Advanced Instructions - Repairing your Remote for Android

1. Start with both the speaker and remote turned OFF.
2. Go to the Bluetooth settings on your phone. If OFF, turn ON.
3. Look at the previously paired Bluetooth devices. If the Wingman speaker and/or remote are listed, select the option to forget them from the phone (this will vary depending on the manufacturer and build version of Android).
4. Open the Bushnell app on your phone.
5. Select the Wingman from the account list.
6. The app screen will show a blue banner that reads Remote Connected (1 of 2). If not, select Pair Device.
7. Press and hold the button on the remote until it chirps.
8. Select the option on the app to pair the remote.
9. Follow the in app instructions to power on the speaker. The speaker should automatically connect via Bluetooth
10. Tap Next on the app.  
11. The Wingman is now ready to use for golf/music.

SETUP INSTRUCTIONS FOR IPHONE

Advanced Instructions - Initial Pairing For iPhone:

1. Restart the phone (initial pairing only).
2. Make sure the phone Bluetooth is turned OFF.
3. Start with both the speaker and remote turned OFF.
4. Open the Bushnell app on your phone.
5. The app will prompt you to go to your phone settings and turn ON Bluetooth.
6. Go back into the Bushnell app.
7. Select Add New Device.
8. Tap on the Wingman icon from the list of devices to be added.
9. Select continue.
10. Press and hold the button on the remote until it chirps.
11. Hit next on the Bushnell app.
12. Power on the Bluetooth speaker.
13. Leave the app and enter your phone Bluetooth settings.
14. Locate the Wingman speaker under available devices and pair the speaker. The speaker will audibly let you know when it pairs.
15. Return to the Bushnell app. The screen will now populate with the serial number of the speaker, and the option to Complete Registration.
16. Tap Complete Registration.
17. The device is now ready to use for golf/music.

Advanced Instructions - Repairing your Remote for iPhone

1. Make sure the phone Bluetooth is turned OFF.
2. Start with both the speaker and remote turned OFF.
3. Open the Bushnell app on your phone.
4. The app will prompt you to go to your phone settings and turn ON Bluetooth.
5. Go back into the Bushnell app.
6. Tap the Wingman icon from the device list.
7. A blue banner should be present reading Remote Connected (1 of 2).
8. Exit the Bushnell App and enter the Bluetooth settings of your phone.
9. Locate the Wingman speaker on the Bluetooth list.
10. Pair the speaker to the phone.
11. Return to the Bushnell app.
12. The blue banner should now read Connected (2 of 2).
13. The Wingman is now ready for golf use/music.

Why is my battery charger blinking red and green?

What does it mean when golf cart charger flashes red and green?

Why is my Ryobi 18v battery charger blinking red and green?

When the battery charger's red light is flashing on and off this means?